Pikkuna elements are really easy to install on all wooden frames and usually do not require a separate frame
If there is no frame for an edge, we recommend installing a minimum of 5cm x 5cm wooden planks
Please note it is possible to choose the appropriate mounting type for each Pikkuna edge
Mounting using Turn buttons
Turn buttons mounting is the most typical mounting method which allows you to mount Pikkuna elements to the top beam and pillars of your terrace. This method of attachment allows optimal tensioning of the element during installation, which ensures the perfect final look of the end result.
By opening the turning buttons, you can dismantle or roll up the Pikkuna element.
At least 5 cm is required for the installation of the turn buttons, which corresponds to the width of the edging.
Each turn button is attached with the two screws supplied.
The colors of the turn buttons correspond to the color range of the edges: white, black, brown, gray and beige.
Hooks mounting
Hooks mounting is a great choice when the top or side edge of a Pikkuna element is to be installed at a 90-degree angle to a wall, pillar or ceiling. This is usually a case when, for example, the top beam and the pillars are not in the same plane and for some reason you do not want to build an additional frame.
However, it is worth noting that the hook fastening cannot be applied at both / opposite edges of the element, the tensioning of the element is not successful in this case and the element does not stay in place in windy weather. We recommend choosing either turn buttons or velcro fastening method on the opposite side of the hook mounting.
Velcro-mounting
Velcro sticker is a sturdy double-sided adhesive tape with one side pre-sewn at the factory to the edge of the element. With a standard stapler you attach the ribbon to the frame of the opening and that’s it! So the installation is really easy and fast.
Please note that velcro-mounting is only applicable in case of a wooden frame. The stapling density of the opposite side of the strip is 2 rivets / 10cm. Weather-resistant galvanized rivets are strongly recommended.
The Velcro sticker can be removed and attached an unlimited number of times. Available in white and black.
Fixed mounting with screws
The screws fastening allows the Pikkuna element to be mounted to the wooden or metal frame.
This method of attachment is used for permanent attachment or when other mounting methods are not possible for one reason or another. For example, when Pikkuna is not planned to be completely dismantled but rolled up in summer, screws are used to secure the top edge.
The screws mounting can also be used with the zipper, so that the element can be further rolled up and down by opening the zipper.
Weight pouch
Weight pouch is typical mounting type, when Pikkuna element borders the floor of the terrace. In this case a so-called weight pouch is made at the bottom of the element, which a cut-out weight bar is placed in. Its function is to stretch the element downwards vertically. Please note, that 8cm standard height of the pocket is included in the free height of the opening and does not need to be considered separately.
